Welcome to the Alpine Blog

When off-the-shelf drums won't cut it, customize!

Posted by Chip Kogelmann

Apr 29, 2021 5:48:00 PM

While the vast majority of the Rockwheel drum cutters are delivered with our standard bomb proof, hard rock drums, sometimes a job has requirements where special solutions are called for.  Our team is well equipped to design and build custom cutting drums and we welcome the challenge!  Close collaboration with the customer along with our nearly 50-years of experience in rock cutting, provides for application specific drum designs. 

Here we're highlighting a few recent projects but first check out Jeremy Foust, among the best in the biz, laying down some tight passes on a set of XHD severe duty rock cutting drums.

Rockwheel Drum Cutter Welding

70" wide drums.  A quarry in Texas which specializes in producing road base material for the oil fields was replacing an obsolete cutter and needed to boost production.  They had a 50+ ton excavator which had the power, weight, and hydraulic capacity to run the uber-powerful G60 Rockwheel drum cutter.  This 300-hp gear driven, rock eating, base pumping, Rockwheel has a gear reduction ratio of 1.2.  This means that every ft-lb of motor torque is magnified by 20% for the highest pick penetration force on the market.  With this power and an assessment of the rock physical properties we were able to increase drum width to 70" (1.8m) without sacrificing cutting performance.  The result was a massive increase in cutting rate (CY/hr).  Take a look...

Special drums for ladder dredge.  Once again, in Texas a unique project.  A cutter head was needed for cutting hard abrasive sandy material to be mounted on a ladder dredge.  A 200-hp G40 Rockwheel hydraulic rock ginder was selected and custom 50" drums with optimal pick lacing (the pattern of the teeth on drum) were designed and built.  The photos below show how this was just the right fit for dredge. Note the wear protection blocks. 

Rockwheel rock grinding attachment

G40 Rockwheel drumcutter

Narrow cutting drum options are available as well.  These are frequently requested for trenching operations.

Rockwheel Americas is the go-to source for hydraulic excavator-mounted rock cutting attachments.   With the largest Rockwheel drumcutter rental fleet in North America and unmatched support we're grinding it out on a daily basis to change the way hard ground is excavated.  Contact us direct or have your local equipment dealer give us a call.  814-466-7134 or visit www.alpinecutters.com  DEALER INQUIRIES ENCOURAGED

more

Topics: Rockwheel, drumcutter, rock grinder, rock trenching, Antraquip, rock cutting

Disturbance free rock cutting adjacent to existing foundation...Rockwheel drum cutters get the job done

Posted by Chip Kogelmann

Jun 1, 2018 11:39:36 AM

With the economy on steroids this year there is tremendous construction activity all over the United States.  Washington, DC is no exception and we're seeing constant renewal where outdated buildings are giving way to new construction.  This means demolition and foundation work in close proximity to existing structures.  Care must be taken and disturbance minimized when working within inches (literally) of existing buildings which are occupied, functioning workplaces or residences.   

Rockwheel excavator mounted rock cutting attachments (sometimes called drumcutters or cutterheads) are an ideal tool when both accuracy and productivity must be achieved simultaneously.  In this case, a limestone bedrock foundation needed to be deepened immediately adjacent to an adjoining building footer.  To avoid the risk of damage to the neighboring structure hydraulic hammers were not an option because of shock waves and vibrations that would be reverberate through the rock mass and concrete.  This can result in cracks and unseen microfractures that weaken the foundation.

Clean 2-hose connection makes installation simple      Simple 2-hose system speeds up installation .  Note helix scroll on cutting drums

image

                        Attack angle of picks shears rock , allows smoother cutting and makes reusable cuttings

 

Rock grinding attachments attack the rock in a very different manner than hydraulic hammers.  Unlike hammers (i.e. breakers), which go after the unconfined compressive strength (UCS) of the rock, the shearing action of the rotating conical carbide picks (teeth) exploits the tensile strength of the rock which is 10%-15% of the UCS.  By "raking" the rock at 45-50 deg. attack angle an added benefit is creation of smaller rock fragments and these cuttings can often be used onsite as backfill without crushing.  This mechanical rock cutting or grinding results in significantly lower seismic disturbance which means safer rock excavation when close to buildings or other sensitive infrastructure such as gas lines.  Moreover, the degree of precision of rock or concrete cutting is exceptional.  Rapid and Precise are two words frequently used to describe the cutting action of the Rockwheel drum cutters.  Compared to other rock grinding attachments on the market the Rockwheel rock and concrete grinders have a optimal layout of teeth on the drums which results in a smooth cutting action.  This means less frequent stalling of the cutterhead, more continuous rock cutting and ultimately more CY/hr (m3/hr).  For exceptionally hard material when pick penetration is hampered a demolition drum can be used which features a helical depth limiter which prevents the tool from try to take too big of a "bite".  This less aggressive drum decreases vibrations and stalling of the cutterhead which means the Rockwheel is cutting rock a greater percentage of the time.

So...the next time you're faced with rock on concrete removal in a sensitive site where collateral damage is unacceptable give the experts at Rockwheel Americas a call.  We'll gladly work with your local excavator dealer to ensure optimal hydraulic set up for peak performance of the rock cutting attachment.  We have a national rental fleet and gladly work either customer direct or through your local equipment dealer.  We maintain an extensive inventory so units can be delivery typically in less than 1-week.  Rent, Purchase, or RPO (rental purchase option)...your call.  Dealers, we're always looking to building new relationships so call about our demonstration and consignment program.  www.alpinecutters.com 

20180515_134507

 

 

 

 

 

 

 

more

Topics: Concrete Grinding, Rockwheel, drumcutter, rock grinder, drum cutter, Antraquip, rock cutting

About this blog

This blog is a resource for research, how-to's, and general news regarding rock grinders, transverse cutter heads, roadheaders, and alternatives to hydraulic hammers. 

The Ultimate guide to Rock Grinding

Subscribe for Regular Email Updates

Recent Posts